General Purpose Dry Lubricant - 1 L / 32 oz SKU 585506

1L/32 oz-

General Purpose Dry Lubricant

Enviro-Save General Purpose Dry Lubricant is a formulation of micro-resin particles and a cleaner carrier liquid that contains no lubricating oil and does not leave an oily dust collecting surface after application.  It is designed to clean, impregnate, smooth or seal any metal, fibreglass and plastic surface asperity when burnished into the surfaces. Two or three applications normally produces the following benefits; reduces dirt build up, easier cleaning, corrosion protection, smoother surfaces, less drag and reduced temperatures when friction and wear are applicable.  Treated surfaces always slide easier after the impregnation process has been completed with an adequate amount of treatment.

Applications include boat hulls, ATV bodies, snow ski, photocopiers, paper cutters, slide rails and runners, photographic equipment, hinges, clocks, toys and mechanical models, exercise equipment, locks, guns, knives, and fishing gear etc.

General Directions

Clean surfaces of visible dirt or contamination prior to treating and warm surfaces to expand the surface asperity for a lasting application.  Check bottle cap, invert bottle and shake vigorously for 15 seconds, then apply sparingly with a small patch of cloth to moving parts or surfaces, by buffing the treatment into the surface and or rub the surfaces together to impregnate treatment.  Repeat several times until the surfaces feel smoother and slide easier.

Firearms & Guns

Treated actions slide easier, treated barrels show an increase in bullet velocity with less heat, and less residue build-up is always noted.  All treated external surfaces will be smoother and protected from moisture or corrosion damage.  It is very common to eliminate the jamming of actions due to smoother surfaces and no oily surface to collect dust or sand.

Directions:  Clean / degrease parts and warm parts or barrels up to 100F / 40C (oven, hair dryer or direct sun) so the surface asperity is expanded beyond normal operating temperature expansion.  Apply treatment to all external surfaces with cotton patch or long cleaning mop for inside barrel.  Buff surfaces after drying time and repeat application several times until the surface asperity is filled and feels smoother, assemble and apply final treatment to moving parts such as bolt actions etc.  After initial treatments have been applied do not use oil – use Enviro-Save treatment for cleaning after use.  The inert micro resin will prevent rust or corrosion on surfaces after adequate treatment has been applied.

Cutting Tools

Drill bits, taps, dies, milling cutters, lathe tools, die punching and stamping tools, router bits, chisels, and drive chains etc.

Directions: Degrease, clean, and dry cutting edges, then heat to 50° C (120° F). Agitate container as above and pour a suitable quantity into a glass or metal container and immediately immerse the heated tool cutting edges, for one hour; remove and air-dry, or apply low heat, prior to use.  Repeat after sharpening.

External Surfaces

Knives, skis, aircraft surfaces, snow machines, mould  release, garden tools, boat hulls, chainsaw bars, guns and fishing gear, counter tops, and pre-assembly of pneumatic cylinders, rods, and control system components etc.

Directions:  Degrease, clean and dry the surface. Agitate container as above.  Apply treatment by spraying or wiping it on with a soft cloth.  Burnish the surface by buffing, repeat application until surface is smoother.   Unfinished or rough surfaces will require additional applications.

NOTE:      On finished or painted surfaces, experiment on a small hidden area.  Do not use when material surface temperatures exceed 350° C (660° F). Consult manufacturer for more information.