· ATV / All Terrain Vehicle ·

2 Stroke over 500 cc

                                                                                       Stock #

         1 -    500 ml      Engine Treatment (fuel tank)          111105

         2 -    55 ml        Gear Treatment                             222001

         1 -    28 mm      Application Hose

         1 -    20 mm      Application Hose

         1 -                      Kit Instruction Sheet

Stock # 815040

This Enviro-Save Metal Treatment product is specifically designed for 2-stroke Gas Engines only, such as:  outboard motors, motorcycles, ATV's, chainsaws, snow machines, weed eaters, lawn mowers, water pumps, etc. The treatment is formulated for “2-stroke engines” and consists of micro resin in a technically formulated cleaner.  The treatment is applied to the fuel or fuel / oil mixture to ensure that the cleaner and resin is distributed to all lubricated friction bearing surfaces in 2-stroke engines, where it becomes permanently impregnated into the bearing surface asperity.  Improved performance is normally noticed immediately and the reduction in carbon build-up is significant. The inert resin treatment also affords excellent protection to bearing surfaces against corrosion, which is very important during off-season storage.  Many 2-stroke engines have been saved from self destruction with Enviro-Save 2-stroke treatment when injection oil or mix oil is not used or mistakenly forgotten.

Application Instructions

Mix Enviro-Save 2-stroke treatment at a maximum ratio of 15 ml (1/2 oz) per 1 litre (32 oz) of fuel, i.e.; 250 ml (8oz) into 20 L (5gal) gasoline tank is an excellent mix ratio.  Invert bottle(s), shake vigorously for minimum 15 seconds and immediately pour into fuel tank.  If possible, operate continuously until all treated fuel mixture is consumed and shake or rock fuel tank periodically during treatment.  Boats with very large fuel tanks should use a 20 L or larger portable fuel tank during the treatment process so the recommended treatment to fuel ratio is not diluted to the extent that the necessary cleaning job is inadequate.

2-Stroke Engine Treatment

*NOTE:        Most high performance / high horsepower engines will burn                      more fuel to obtain their peak horsepower output, therefore the Enviro-               Save 2-stroke treatment / fuel mixture will flow through the engine                              faster and escape out the exhaust ports faster than a standard lower              horsepower engine.  This is the reason we do not recommend                              increasing or doubling any treatment/fuel mix ratios.  We recommend a              high dilution treatment / fuel mix ratio for a longer period in order to                    guarantee a thorough lasting treatment and impregnation of all friction               bearing surface asperity.   New engines should only be treated after break-in                  period.  Use Enviro-Save Gear Treatment in stern drives legs, gearboxes and manual     transmissions on motorcycles, chain cases on snow machines, chainsaw chains and   ATV’s, etc.   Refer to chart for correct quantity of Enviro-Save 2-Stroke Engine        Treatment to match engine size or rated horsepower.